|
MTS5800 and MTS5800-100G Handheld Network Tester |
 |
The industry’s smallest 10G and 100G handheld instrument supports testing throughout the entire service life cycle including fibre characterisation, service activation, troubleshooting, and maintenance!
All-in-one handheld network and fibre testing
The one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations.
Introduction |
The industry’s smallest handheld instrument can test throughout the service life cycle, including fibre characterisation, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.
Key Benefits MTS5800
Key Benefits MTS5800-100G
Key Features
|
|
|
Back-Pack Expansion Modules |
|
|
Increase the capability of the MTS5800 or MTS5800-100G with the inclusion of Viavi's expansion modules which simply fit to the back of a new or existing test set. TEM Module
OTDR Modules
Optical Spectrum Analyser Module
|
|
Smart Link Mapper
"If the OTDR were invented today, it would look like VIAVI's Smart Link Mapper"The SLM intelligent optical software application helps technicians use an OTDR more effectively, without the need to understand or interpret OTDR results. Each event is displayed as an icon giving users a schematic view of the entire link, known as SmartLink. SLM can completely correlate to the original OTDR trace as experts desire. With this common approach to simplify OTDR testing and streamline the procedures, four tailored SLM OTDR applications are available for different network types. For more details about each of the applications (Enterprise-SLM, FTTA-SLM, FTTH-SLM and Cable-SLM), visit the Options tab above page. |
|
Key Benefits
Key Features
|
|
Models In The Series
|
Model click for details
|
Port #
|
Mode
|
Wavelength
(nm) |
Dynamic Range
(dB) |
Approx Distance see note below (km) |
| MTS5800HVT-KIT1 | 1 | MM | 850/1300 | 26/24 | |
| MTS5800HVT-KIT2 |
1 2 |
SM MM |
1310/1550 850/1300 |
37/35 26/24 |
100-120 |
| MTS5800HVT-KIT3 | 1 | SM | 1310/1550 | 35/33 | 100-120 |
| MTS5800HVT-KIT4 | 1 | SM | 1310/1550 | 40/40 | 120-140 |
| MTS5800HVT-KIT5 | 1 | SM | 1310/1550 | 43/41 | 120-140 |
| MTS5800HVT-KIT6 | 1 | SM | 1310/1550/1625 | 46/45/44 | 130-150 |
|
NOTE: “Distance” above refers to the approximate fibre distance that can accurately be certified based on 0.2dB/km fibre loss @ 1550nm (0.22dB for 1625/1650 only OTDRs) & 0.1dB splices every 2km. Note too that for the same distance, test times reduce with dynamic range increase – roughly half the test time for every 2-3dB increase in dynamic range. |
Applications
Power Utilities WAN/LAN c37.94 Testing
The VIAVI MTS-5800 delivers power utility operators the ability to measure reliability on the WAN backbone and on the substation LAN. As utilities transition from T1/SONET/IRIG-B to Ethernet /MPLS, the MTS-5800 platform gives technicians all the test capabilities necessary to ensure high network performance, including Ethernet/IP with multiple VLANs, MPLS, and 1588v2 (PTP).
In addition, the MTS-5800 family allows technicians to test WAN circuits and the substation fiber plant for cleanliness and to confirm that connectors, splices & patch panels are functioning properly. Tele-protection interfaces, specifically C37.94 optical power and loss in order, that connect power system equipment to Intelligent Electrical devices (IEDs) should be Bit Error Rate tested to confirm that EMI is not negatively impacting communications.
 |
Optical Fibre Loss - OTDR Testing
|
|
Once you've read about the MTS-5800 below, why not click on the Vicom OTDR Selection Guide and find out which models are ideal for YOUR applications?
|
